Haha your second paragraph sums it up perfectly. A few folks did share their settings, but they were for completely different printers/hardware haha. Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby, and it’s strangely spread out in random little nooks of the internet - there’s not really a ton of centralized discussion forums. Maybe the hobby is way smaller than I thought, or maybe I’m just in way over my head, but I fix tech problems for a living - did not expect this to be as much of a challenge. Never buy a 3D printer if you value your sanity and living stress-free. Sorry, I just needed to rant for a minute haha.
Yeah 3D printers are fussier than I expected. Especially when printing anything involving supports and more specifically… small areas that need supports. I print a lot of stuff for D&D and have just started cutting things up into pieces with blender to print easier, then glue it together
I will say. My first thought was obviously to ask what printer you have, to see if I could send you my profile for you to compare (depending on the slicer you use). Then my second was to ask if you’re having issues and if so, what the issues are.
Only because sometimes a seemingly large issue could be a very small fix.
When I first started, I got it working great and then out of no where nothing would stick to the bed. I spent more time than I’d like to admit messing with settings only to realize it was the oils on my hands causing adhesion issues. Some 99% IPA fixed all my issues real quick haha.
That would be awesome! I’ve got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I’m just trying to find that perfect spot to where it extrudes but doesn’t grind filament. I’ve been having some really messy prints.
I just had a feeler gauge arrive in the mail, so I’m about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.
I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?
Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby
I’ve had exactly the opposite experience lol. Most of the stuff out there is dreadfully basic, and if you want detail like scientific comparisons of the strength-weight ratios of different infill patterns, good fuckin luck. Some chum on YouTube will have some half baked experiments and that’s as good as it gets.
Haha your second paragraph sums it up perfectly. A few folks did share their settings, but they were for completely different printers/hardware haha. Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby, and it’s strangely spread out in random little nooks of the internet - there’s not really a ton of centralized discussion forums. Maybe the hobby is way smaller than I thought, or maybe I’m just in way over my head, but I fix tech problems for a living - did not expect this to be as much of a challenge. Never buy a 3D printer if you value your sanity and living stress-free. Sorry, I just needed to rant for a minute haha.
Yeah 3D printers are fussier than I expected. Especially when printing anything involving supports and more specifically… small areas that need supports. I print a lot of stuff for D&D and have just started cutting things up into pieces with blender to print easier, then glue it together
I will say. My first thought was obviously to ask what printer you have, to see if I could send you my profile for you to compare (depending on the slicer you use). Then my second was to ask if you’re having issues and if so, what the issues are.
Only because sometimes a seemingly large issue could be a very small fix.
When I first started, I got it working great and then out of no where nothing would stick to the bed. I spent more time than I’d like to admit messing with settings only to realize it was the oils on my hands causing adhesion issues. Some 99% IPA fixed all my issues real quick haha.
That would be awesome! I’ve got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I’m just trying to find that perfect spot to where it extrudes but doesn’t grind filament. I’ve been having some really messy prints.
I just had a feeler gauge arrive in the mail, so I’m about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.
I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?
I’ve had exactly the opposite experience lol. Most of the stuff out there is dreadfully basic, and if you want detail like scientific comparisons of the strength-weight ratios of different infill patterns, good fuckin luck. Some chum on YouTube will have some half baked experiments and that’s as good as it gets.