Marxists believe Socialism is what Capitalism is necessarily leading to because decentralized markets form centralized monopolist syndicates with complex internal planning

Jesus fucking Christ, I was just talking to a friend about how big corporations with hundreds of thousands of employees resemble centrally planned economies, and how consolidations creates them all around us and the only thing stopping them from becoming fewer is the attempts of some governments that haven’t been regulatory-captured yet to stop it. But regulatory-capture increases with wealth accumulation so if you keep running the system, it tends to total central planning. I haven’t read Marx and neither has he.

On a separate but related point - what stops the system from being somewhat disrupted by labor in a way that redistributes huge amounts of the accumulated wealth, restoring the regulatory regime in favor of labor and restarting the cycle from that point, then repeat. In other words, what’s stopping it from doing a depression-FDR-redistribution every 100 years? I can absolutely see the inevitable end without labor intervention but to my current brain it seems possible to maintain it with. Is this wrong in some obvious way?

Well it’s not the government doing this it’s private insurance companies. You’re free to shop around or start your own insurance company. This makes me feel much better about gatekeeping healthcare. 🦅🇺🇸

While true for the component itself, there’s material difference for any caps surrounding it. Sure the chipset would work fine at 40, 50, 70°C. However electrolytic capacitors lifespan is halved with every 10°C temperature increase. From a brief search it seems solid caps also crap out much faster at higher temps but can outlast electrolytic at lower temps. This is a consideration for a long lifespan system. The one in my case is expected to operate till 2032 or beyond.

I don’t think other components degrade in any significant fashion whether they run at 40 or 60°C.

Unfortunately I didn’t take before/after measurements but this thick plastic sheet cannot be good for the chipset thermals. 🥲

Huh, interesting. I had no idea. Well I don’t need it to be anywhere faster than 100M. USB2 can definitely do that. Closer to 200M. With that said, the latency is more important if you’re gonna do anything like Steam Link.

Found the GNOME developer.

Ads? I thought the Shield didn’t have any…

It’s a Chromecast with Google TV (CCwGTV) wich itself is a dongle. It’s connected to a Plugable USB-C PD hub - another dongle. The white bit sticking to the left from the hub is a TP-Link UE300 Ethernet adapter - yet another dongle. Finally there’s an SD card inserted in the Plugable hub as well as an HDMI coupler hooked to the other end of the CCwGTV which allows connecting an HDMI cable to it.

I’ve been thinking about Shield TV but I hear it’s not great with updates.

It is. I just wish it wasn’t this expensive. Will have to live with it for a while. 😅

So generally Pegatron. :D I used to buy GB because it was made in Taiwan when ASUS became Pegatron and went to China. Their quality decreased. GB used to put high quality components on their boards in comparison. But now GB is also made somewhere in the PRC. I’ve no idea where MSI are in terms of quality. We used to make fun of them using the worst capacitors back in the 90s/00s. Looking at their Newegg reviews, their 1-star ratings seem lower proportion compared to Pegatron brands and GB. Maybe they’re nicer these days? The X570 replacement I got for this machine is an ASUS - “TUF” 🙄

Signature Plastics G20

They feel a bit like a mix between DSA and laptop keycaps.

What do you buy?

I think I found the source of the liquid @[email protected]. The thermal pad under the VRM heatsink has begun to liquefy into oily substance. This substance appears to have gone to the underside of the board through the vias around the VRM and discolored itself.

Some rubbing with isopropyl alcohol and it’s almost gone:

Perhaps there’s still life left in this board if used with an older chip.

I think the board has reached the end of the road. 😅

Hard to say. She’s been in 24/7 service since 2017. Never had stability issues and I’ve tested it with Prime95 plenty of times upon upgrades. Last week I ran a Llama model and the computer froze hard. Even holding the power button wouldn’t turn it off. Did the PSU power flip, came back up. Prime95 stable. Llama -> rip. Perhaps it’s been cooked for a while and only trips by this workload. She’s an old board, a Gigabyte with B350 running a 5950X (for a couple of years), so it’s not super surprising that the power section has been a bit overused. 😅 Replacing with an X570 as we speak.

Funny enough, I can’t detect the smell from hell. Could be COVID.

Iiinteresting. I’m on the larger AB350-Gaming 3 and it’s got REV: 1.0 printed on it. No problems with the 5950X so far. 🤐 Either sheer luck or there could have been updated units before they officially changed the rev marking.

On paper it should support it. I’m assuming it’s the ASRock AB350M. With a certain BIOS version of course. What’s wrong with it?

B350 isn’t a very fast chipset to begin with

For sure.

I’m willing to bet the CPU in such a motherboard isn’t exactly current-gen either.

Reasonable bet, but it’s a Ryzen 9 5950X with 64GB of RAM. I’m pretty proud of how far I’ve managed to stretch this board. 😆 At this point I’m waiting for blown caps, but the case temp is pretty low so it may end up trucking along for surprisingly long time.

Are you sure you’re even running at PCIe 3.0 speeds too?

So given the CPU, it should be PCIe 3.0, but that doesn’t remove any of the queues/scheduling suspicions for the chipset.

I’m now replicating data out of this pool and the read load looks perfectly balanced. Bandwidth’s fine too. I think I have no choice but to benchmark the disks individually outside of ZFS once I’m done with this operation in order to figure out whether any show problems. If not, they’ll go in the spares bin.