Boo fuckin’ hoo… Good riddance.

Well, as per the 2nd amendment, buy a gun, make sure they don’t live . If you’re going to jail anyway…

Doesn’t “digital” imply “electricity”?

The integration part is because we would like for anyone to fit in, and not be confined to your ‘hood’

We don’t mind you not speaking the language, but English is usually not a first language, sometimes not even a second, and sometimes omitted. Especially in rural areas.

So yeah, it’s nice if we can actually have a conversation about the local soccer team, or town buffoon who thinks the government is conspiring about pricing covid shots too high…

Obviously I do not know Australia that well, but what I gather from Mad Max movies is that you have a lot of desert and silver painted teeth… Just kidding. 😉 Europe is indeed more densely populated than, and we have ‘decent’ infrastructure for travelling. When I started my EV journey 6 years ago, the only superchargers were owned by Tesla, and the fastest non-Tesla chargers would need 4-8 hours to fill my 260kms range car. Which was appalling. Over the past 6 years, I’ve seen enormous improvements, because we want to get rid of ICE cars by 2035.

Today there are superchargers every 50-100kms on highways.

Unfortunately, these (super)chargers do not get as much coverage in ads like gasoline/diesel get, and it took me some time to understand and find my way in chargerland. I’ve learned you need to actively search for the charging infrastructure if you need it.

So I would be interested to see what is happening down under….

I am not a professional mechanic, and I know 0 about car maintenance. I do know my EV is cheaper in maintenance than my last ICE. Over the last 15 years i drove an ICE (3 different cars, all new), I had to go to the garage at least 2x a year for a full check up costing me at least 800€ for each check up. First time I asked a Tesla service center to plan a full check up, they jokingly told me they would be happy to change my wiper fluid and charge 1k for that. The only thing I pay money for is my tyres.

I get it that not all cars are built the same and sometimes you have a car which is “built on monday” (one that falls abart at every turn), but judging by my experience, and my friends’ experience with their Teslas, EVs are cheaper in maintenance. But again, I am not a mechanic.

I will not go into the advantages of EV over ICE in environmental issues, as @GameGod has done a better job than I could.

I don’t feel attacked at all. But when you misrepresent EV cars because of your lack of experience with them, and prejudice because 2nd hand cars are chaper than new cars, I do feel I need to speak up. Other people might get the wrong idea…

Maybe the Ioniq ‘feels’ heavy, but mine never have, even though the mX is quite heavy. Don’t know if I would get another Tesla, seeing what kind of shite Musk turns out to be (no I have no issues with him being a republican, I just dislike his shitty personality and the way he treats people around him, including his daughter)

I used to be a stick-shift person myself, but recent automatic cars have vastly improved and are in many ways superior to manual sticks. I do not consider myself an experienced driver, nor a petrolhead, but I was stuck in my ways, because I was prejudiced. The EVs, OTOH, are not automatic, as they only have 1 speed, so you never lose power because your engine needs to shift gears…

That would be Mr Asshole for you, dear sir, or madam, or whatever title you like to be addressed with.

Tell me you’ve never tried to cross the lights before the proverbial blue beamer which was revving its engine while spewing loud obnoxious music through the open windows/roof, and I’ll show you a liar.

You must have really driven a golf cart, as what you describe is nowhere near the real EV experience.

You’re comparing a 2nd hand car to a new EV? Then yes the initial coat is higher, of course. While the 1968 Ford Galaxy is a marvel to behold, it doesn’t compare to modern ICE cars. Even the base VW Golf has better specs… But I digress… Cars like that are the reason we need EVs if we want to control climate change. The amount of CO2 that baby expells is just way of the charts…

Is electricity cheap? No. But I would be more interested to see how much kW/h your AC unit is using. And how much gallons per mile you’re consuming. That is the only valid comparison to make here. And I would seriously encourage you to look at heat pumps.

EVs are good for people who actually look at cars and who know about cars. Not people who are dinosaur guzzling go-carts prejudiced.

EV’s surpass ICE cars in many ways. My car tells me exactly when I will need to ‘fill her up’. My last ICE couldn’t accurately do that, as it didn’t account for heating/cooling, …

Been driving an EV for 6 years now. Tesla model X (range ~ 260kms) first, now a model Y LR (range ~ 480kms).

I easily leave any competition behind me at red lights, whenever there’s someone who doesn’t know the specs of my car.

Current ranges have improved over the previous generations, and are still getting better.

I easily drive 1000kms in one day with about 3 20-30 minute stops. Which is excellent to stretch the muscles, play a game of petanque or just play a game on the console. It all adds to de-stressing while driving, and arriving well rested at my destination.

Whether your car is driving like a couch or a roadster all depends on what car you buy. Sure a Prius will drive a lot less aggressively than a Lambo, but they are totally diffe cars with a totally different target. Compare the right cars with each other…

So… Europe? 160 ish?

OpenSus

The problem with SELinux/nftables/cgroups is that they don’t come with a centralised log aggregator, and they don’t do much blocking beyond the defaults for 99% of deployments.

You must not have heard of ®syslog.

Also, SELinux is a massive pain to set up (even compared to AppArmor), and setting it up correctly is even worse.

I beg to differ, I find SELinux easy to setup. But your mileage may vary, depending on one’s experience.

CrowdStrike does a lot of what SELinux does but it’s easier to configure, works on every operating system, and comes with tools to roll out configuration across an organisation. There’s nothing close to that in the open source world. Even if you set up something yourself, you’ll need to continuously tweak your setup not to get in the way of employees and to prevent alert fatigue from all of the false positives. Apparently, recent events show it doesn’t work on every OS… 😜

When talking about ease of use… Configuration is configuration. If you do not take the time to learn how to use your product, the product you know will always be better than the one you don’t. I’ve used Crowdstrike. I’ve battled them to get their kernel modules signing certificate to be signed by RedHat. I’ve battled them to have the possibility to have the auto update disabled. So no, I am not impressed by the quality of their product. I’ll bet any day a vanilla RHEL with the correct security related software and the latest updates outperforms and outclasses Crowdstrike.

I think a preconfigured solution like Security Onion combined with tons of group policy and Ansible can form an open source alternative, but that only monitors, whereas CrowdStrike also blocks. To block behaviour, you’ll need to write code for most platforms, and that’s just as likely to take down your org as an auto update from CrowdStrike. I can’t speak of MS products, as I have not managed them for 20 years, but all of this is not needed on a decent Linux distro.

You assume I would think you’re wrong. I do not.

Morally, assassination is despicable. But so is fascism.

I applaud you for taking the high road, while I just say Fuck ‘em all. Fascism should not be tolerated, even in a democracy.

It doesn’t require Hitler-level Evil. Just pragmatism.

What CrowdStrike is actually selling, is someone who actually looks at the system logs and who pushes a button when something pops up. Roughly.

There are better solutions on the market. Unfortunately CrowdStrike has the more aggressive sales team.

For those wondering, I’m referring to *nix based solutions like SElinux, appArmor, iptables, nftables, cgroups, … But you need to monitor your logs if you want to take appropriate action.

He did (at least) one good thing in life, and people feel the need to smear him…

I was kind of getting really desperate, as I usually, IMO, take good care of the machine. And usually I know hoe to solve issues. But in hindsight, and after checking timestamps, I do believe it is the slicer. When I updated it earlier this year I printed some figs, but couldn’t troubleshoot during to time constraints, and I parked it. So recently I picked up printing some more, but it didn’t connect immediately.

So yeah, I blame the slicer, and my lack of time.

Thanks for taking the time to reply.

I eventually ended up removing my slicer (Chitubox basic) and install the latest and greatest after cleaning up my profile. So literally starting anew.

Aside from changing te resin, I didn’t modify any other settings to begin with, so my config was rather vanilla.

After taking these steps (and cleaning the z-axis and replacing the nofep again) everything seems to be working fine now.

Cleaning the axis and a new nofep didn’t seem to do anything, so I think it was just a crappy version of the slicer.

Thanks for taking the time to reply.

I eventually ended up removing my slicer (Chitubox basic) and install the latest and greatest after cleaning up my profile. So literally starting anew.

Aside from changing te resin, I didn’t modify any other settings to begin with, so my config was rather vanilla.

After taking these steps (and cleaning the z-axis and replacing the nofep again) everything seems to be working fine now.

Cleaning the axis and a new nofep didn’t seem to do anything, so I think it was just a crappy version of the slicer.