i first went to https://kbin.pub (the site for the software itself), nothing posted there so i followed the link to the repo to check open issues. saw it was being addressed, so i just used a lemmy instance in the interim.

the news on regular tv last night was totally lopsided. tons of ‘reaction’ from the right and far-right, hardly anything from anyone else.

10 years, double the prices? ain’t that far off.

at our mcd, at least that much for many, if not most, things on their menu. everything i (used to) buy there, anyway. and way more than that for the former ‘dollar menu’ items. beverages the least affected, although it’s now probably double, too (the large cup shrunk on top of the ~ 90% increase since then).

see also: chromebook’s chromeos

it’ll be covered on screen 73 of the ‘agreement’ required to use the device.

correct; acquired in 2013.

at the office we have the ones you have to push down–and hold for the water to run. i’ve encountered them elsewhere and you get 10-20 seconds before the water shuts off… ours doesn’t. by the time you get your hand down to the water, it’s shut off.

i’ve seen two of these things around here. they’ve both been on the flatbed of a local towing service.

i half expect a hung jury. there’s bound to be one maga on the jury that won’t budge.

ad-skip to present day. encryption and drm is being introduced into the new atsc 3.0 broadcast standard, and some stations are already using it.

i bought a few smr drives, knowing they were smr. they were cheaper, a lot cheaper than the same amount of space in cmr. used only for static media storage, so that’s not a big deal, really., but holy hell was it slow getting stuff on them initially.

i have a few self-powered externals that are also smr (quite common with those as they use 2.5in notebook hdd). when those things have to start shuffling bits around and rewriting tracks, sustained write speeds fall well under what even usb2 can send.

i bought a big external hdd recently on impulse… a clearance sale. it was really, really cheap. with the thinking that i could ‘shuck’ it because i’m short on space in a couple storage systems. i checked. i can, but i haven’t. hell, i haven’t even used it yet other than to run a full smart diag on it, followed by a full format and a read/write verify. took days. then i put it back in the box and have basically forgotten about it until now.

you have to be careful on what models you buy. some have usb built onto the controller board (no internal sata) or other things (e.g. encryption chip, weird power) that make it more difficult or even impossible to use the internal drive in an environment other than the enclosure it ships in.

these clowns have shifted so far to the right, they’re in danger of falling off the edge of the earth.

ting hasn’t been the same since dish bought it from tucows.

on my arch-based systems, i use repos first, aur second. appimages third. i do also have a couple minor things (that are self-contained with no dependencies) that were just ‘unzipped’ into their own directories and links added to menus where appropriate. note that i don’t game on these systems. i don’t have a lot of aur packages installed, so updates and subsequent recompile time isn’t an issue.

i have yet to run into anything i want or need that isn’t available in those. so no flatpaks or snaps.

hard drives are going to be slow af copying data to itself, or moving data to a different partition on it.

then you’re also adding partition size manipulation to the mix, which will also be slow af when data has to be moved off the ‘end’ of partitions to ‘make room’ to enlarge or create another with a different fs.

your best option is to get another drive, even if it’s also a hard drive instead of ssd. use that to move (copy, really, to preserve the original as a backup for the time being) all the data to that you want to preserve.

small town, middle of nowhere in the upper midwest. an hour away from basically anything other than walmart and a few fast food joints, and more than our fair share of climate change-denying maga morons.

we have multiple locations with chargers.

upgrades have been working fine here, both linux and windows, for well over a decade.

only if a system is also being repurposed at the time of the ‘upgrade’, or if i’m changing the connection type of the boot drive (such as from sata to nvme, or switching an older system to ahci mode) do i install ‘from scratch’.

definitely keep windows on it to begin with. once you’re fully settled-in on linux and haven’t even looked at windows for at least a couple weeks, make one last backup… then nuke it or repurpose it.

as real as artificial cheese.