How to Setup i2pd on Alpine Linux Container (LXC) in Proxmox
strict3443.codeberg.page
Create Proxmox Alpine container for i2pd router Step 1: Download the Alpine Linux container template https://pve.proxmox.com/wiki/Linux_Container#pct_container_images 1a: Open a SHELL on your Proxmox host and query the available alpine linux containers pveam available | grep alpine 1b: Download the version of Alpine Linux you want. Ex. pveam download local alpine-3.18-default_20230607_amd64.tar.xz NOTE: local in this command is your named storage device, your storage might be named differently 1c: Ensure the container was downloaded with the command:

This is a little guide to show you how to setup a small container dedicated to an i2p router such as i2pd. This allows for a central router for all your clients on your LAN for example.

Read the guide

i2pd Alpine Setup Script

  • Meldrik@lemmy.wtfEnglish
    1·
    1 year ago

    What about the Router console? Is this something that’s only available with i2p, or does it also exist with i2pd?

    • Strict3443@lemmy.mlOPEnglish
      2·
      1 year ago

      That is i2p-java and i2p+ only. i2pd is only the router which is why it is so small and fast.

      • Meldrik@lemmy.wtfEnglish
        1·
        1 year ago

        Okay, so i2pd is the lightweight version and all the configs happens in the config file available.

        Is there a way to test that i2pd is actually working?

        • Strict3443@lemmy.mlOPEnglish
          2·
          1 year ago

          Step 5 from the guide shows how to test if i2pd is running on your Alpine container. If you are using i2pd on another machine, similar commands will work as well.

          For the Alpine Container:

          • Run ps command to see if the i2pd program is running
          • Run service i2pd status to see that status. Ex. * status: started
          • Find your container’s local IP address with ip -4 a and navigate to the i2pd web console at http://:7070
          • Meldrik@lemmy.wtfEnglish
            1·
            1 year ago

            Thanks, I’ve done that and I can access the i2pd webconsole, but it doesn’t seem to run correctly. I’ve had it run for over 20 hours now and it just says Network status: Unknown.