Context: I have a Ford Taurus AWD with a naturally aspirated 3.5L V6 (288 hp & 254 lb-ft, stock). It had reached the point in life where it’s old enough that I’m ok tinkering with it, but new enough that it’s still worth tinkering. There was also zero info about tuning this engine and I wanted to fix that. So I brought it to a dyno.
I went with an HP Tuners ECU. The only other “mod” to my car was a set of one-step colder spark plugs; everything else is stock. Edit: I also stuck with 87 octane.

The shop managed to increase the peak wheel horsepower from 217 hp to 231; and the torque from 203 lb-ft to 222. Increases of 14 hp and 19 lb-ft, or 6% and 9%, respectively. Assuming the parasitic losses is the same, my new power at the crank is roughly 306 hp and 278 lb-ft. Pretty similar to the stock 3.7L that Ford made.
But as you can see from the graph, other areas improved even more. Some sections received 20+ lb-ft, and 15+ hp above 5000 rpm.
Mileage seems to have improved, too. However I still need to test that more. I’ve only had this tune for a week now.

I haven’t done many hard accelerations, but it does feel a little faster when accelerating. Pre-tune, I remember feeling a surge in power around 4000 rpm; I’m glad the dyno proved me right.
In terms of feel, the most noticeable difference is in city driving. The engine feels so much more responsive when I start to press on the pedal from a standstill. But not in a jerky, aggressive way (unless I choose to floor it); it’s still a very comfortable daily driver. It just “feels” more put together, if that makes sense.

Total cost for the dyno and tune was around $1500-2000. Plus any extraneous repairs they required me to do before I could go on the dyno (I.E. I had a leaky transaxle seal that cost $525 to replace). So, I see why not many people choose to get their cars tuned. At the same time, I feel this was worth it for the science.
If anyone has any questions, I’ll try to answer them as best I can.

  • Pirky@lemmy.worldOP
    link
    fedilink
    arrow-up
    3
    ·
    8 months ago

    Pretty much. You can only do so much with a naturally aspirated engine. So if you want big gains from a tune, get a turbo’d engine.
    I could turbo it, but I don’t want to drop that much money on it at one time. Plus I’d have to replace the transmission because Ford only rated the 6F50 for 300 hp and 280 lb-ft.
    So that’d be another couple grand on top of the couple grand for the turbo.
    That’s just way more than what I can afford.

    As for mileage, 2-3 mpg actually feels about right. The computer is saying higher mileage than stock, but it’s not a huge gain. I need to do more driving before I can say just how much better it is.